CLINICAL-THERAPEUTICAL MANAGEMENT OF EXPOSED PULP USING BIOACTIVE MATERIALS: TWO CASE REPORTS

Aims: This article present alternatives of bioactive materials use for direct pulp capping in immature teeth and for apexogenesis.Case report: Two case reports with the application of bioactive cementsare presented here: one in a tooth with pulp exposure and another with deep carious lesion, pulp exposure and open apex.Results: In both cases, the treatment was performed in one visit and a favorable clinical and radiographic follow-up was achieved.Conclusion: The use of bioactive materials ledto the formation of a dentin bridge and healing process in the pulp tissue exposure, without the need for conventional endodontic treatment

Comparison of the effect of iRoot BP Plus and MTA on direct pulp capping of carious pulp exposed mature permanent teeth / 口腔疾病防治

Objective@#To study the clinical efficacy of biological ceramics (iRoot BP Plus ) and mineral trioxide aggregate (MTA) in direct pulp capping of mature permanent teeth, to provide referrence for clinical application.@* Methods @# Seventy-four patients with pulp exposure due to deep caries or reversible pulpitis in 75 mature permanent teeth were selected and were randomly divided into two groups. iRoot BP Plus were used as pulp capping agents in the treatment group and MTA were used as pulp capping agents in the control group respectively. The clinical efficacy and imaging analysis were performed at 1, 3, 6 and 12 months after operation. Treatment success rate of the two groups were calculated, and the influence of various factors including gender, age, tooth position, cavity, number and size of pulp exposure on the efficacy of direct pulp capping were analyzed. @* Results @#Sixty patients with 61 mature permanent teeth were selected. Twelve mouths after treatment, 61 teeth of 60 patents were completely investigated (iRoot group: 31 teeth 30 patients; MTA group: 30 teeth 30 patients). The success rates of the 2 groups were 90.3% (iRoot BP Plus) and 90.0% (MTA), respectively. There was no statistical difference between 2 groups (P>0.05). Statistical analysis also showed that gender, age, tooth position, cavity, number and size of pulp exposure had no significant difference between the two groups (P>0.05). @*Conclusion@# Both iRoot BP Plus and MTA are effective in direct pulp capping of mature permanent teeth with carious pulp exposure, while the operation of iRoot is simple and convenient.

Histological study of platelet-rich fibrin combined with MTA for direct pulp capping of rabbit teeth / 口腔疾病防治

Objective @# To investigate the outcomes of a novel direct pulp capping agent containing platelet-rich fibrin (PRF) and mineral trioxide aggregate (MTA). @*Methods @# A total of 32 New Zealand rabbits were randomly divided into 4 groups, namely, the PRF+MTA group (P+M group), PRF group (P group), MTA group (M group) and blank control group (BC group), with 8 rabbits per group. Dental pulp exposure and direct pulp capping were performed, and complete crown square sealing was performed on 2 mandibular central incisor teeth of each rabbit. Four rabbits from each group were euthanized after each observation period (7 and 28 days). The experimental teeth were subjected to HE staining. Inflammatory cell infiltration, calcified bridge formation and pulp tissue disorganization were observed and graded. @*Results@#Inflammatory cell infiltration: on the 7th day, group P+M and group M were lighter than group BC (P<0.05); on the 28th day, group P+M was lighter than group P and group BC (P<0.05); group P+M and group M did not significantly differ (P>0.05). Calcified bridge formation: on the 7th and 28th days, group P+M was lighter than group P, group M and group BC (P<0.05); on the 28th day, group M was higher than group BC (P<0.05). Under microscope, the calcified bridge contained cellular components and was surrounded by odontoblast-like cells, sharing a structure resembled osteodentin; dentin tubule-like structure could not be observed in calcified bridge, and the calcified bridge resembled certain points of osteodentin. Pulp tissue disorganization: on the 7th day, group P+M and group M were lighter than group BC (P<0.05); on the 28th day, group P+M was lighter than group P and group BC (P<0.05). group P+M and group M did not significantly differ (P>0.05). @*Conclusion @# The combination of PRF and MTA for direct pulp capping provided light inflammatory cell infiltration, stable pulp status and a strong ability of pulp tissue to form calcified bridge, and the calcified bridge resembled certain points of osteodentin.

Deep occlusal carious lesions clinical management by Brazilian dentists: a nationwide e-survey / Manejo clínico de lesões cariosas oclusais profundas por cirurgiões-dentistas brasileiros: uma pesquisa eletrônica nacional

Objective: To investigate the clinical management of deep occlusal carious lesions in permanent teeth by Brazilian dentists. Material and Methods: This cross-sectional study included a sample of 732 Brazilian dentists who responded to an electronic questionnaire composed of 20 questions addressing socio-demographic information, training and professional activity characteristics, and clinical management of deep carious lesions. Descriptive analysis was performed, considering relative and absolute frequencies and 95% confidence intervals. The association between the dentists' variables of interest (age group, type of higher education institution, years in practice, highest academic degree completed and main sector of professional activity) and the mean number of incorrect answers regarding deep carious lesions management was analyzed by Analysis of Variance (ANOVA), followed by the Bonferroni post-test (p<0.005). Results: Stepwise removal was the strategy pointed out by most dentists (42.8%). However, 16% of the dentists selected nonselective carious tissue removal. Furthermore, 45.6% of the dentists disagreed with maintaining carious tissue over the pulp in deep lesions with a risk of pulpal exposure. When using instruments to remove carious dentine, 17% of the dentists chose a diamond burn while 13% preferred tungsten carbide burs. Dentists who graduated from public institutions had a lower mean of non-conservative decisions than those from private institutions. Dentists with master's or doctoral degrees were more conservative, as well as dentists from public service compared to those from the private sector. Conclusion: The dissemination of conservative approaches in the management of deep carious lesions needs to be strengthened and increasingly based on updated scientific literature.(AU)

Objetivo: Investigar o manejo clínico de lesões cariosas oclusais profundas em dentes permanentes por cirurgiões-dentistas brasileiros. Material e Métodos: Este estudo transversal incluiu uma amostra de 732 dentistas brasileiros que responderam a um questionário eletrônico composto por 20 questões abordando informações sociodemográficas, formação, características da atividade profissional e manejo clínico de lesões cariosas profundas. Foi realizada análise descritiva, considerando frequências relativas e absolutas, e intervalos de confiança de 95%. A associação entre as variáveis de interesse (faixa etária, tipo de instituição de ensino superior, anos de prática, maior titulação acadêmica concluída e principal setor de atividade profissional) dos cirurgiões-dentistas e a média de acertos no manejo de lesões cariosas profundas foi analisada pela Análise de Variância (ANOVA), seguida do pós-teste de Bonferroni (p<0,005). Resultados: A remoção seletiva foi a estratégia apontada pela maioria dos cirurgiões-dentistas (42,8%). No entanto, 16% dos dentistas selecionaram a remoção não seletiva do tecido cariado. Além disso, 45,6% dos dentistas discordaram da manutenção de tecido cariado sobre a polpa em lesões profundas com risco de exposição pulpar. Ao usar instrumentos para remover a dentina cariada, 17% dos dentistas escolheram uma broca diamantada, enquanto 13% preferiram brocas de carboneto de tungstênio. Cirurgiões-dentistas formados em instituições públicas apresentaram menor média de decisões não conservadoras do que os de instituições privadas. Os cirurgiões-dentistas com mestrado ou doutorado foram mais conservadores, assim como os cirurgiões-dentistas do serviço público em relação aos do setor privado. Conclusão: A disseminação de abordagens conservadoras no manejo de lesões cariosas profundas precisa ser fortalecida e cada vez mais baseada em literatura científica atualizada (AU)

Success rate of silver nano-particles in comparison to silver diamine fluoride in management of deep carious lesions: a randomized controlled clinical trial / Taxa de sucesso de nanopartículas de prata em comparação ao fluoreto de diamina de prata no manejo de lesões cariosas profundas: um estudo clínico controlado randomizado

Objective: Evaluate the effectiveness of nanosilver fluoride in comparison to silver diamine fluoride in management of deep carious lesions. Material and Methods: This double-blinded randomized controlled clinical trial included thirty-six patients with deep carious mandibular molars. Patients were recruited form the outpatient clinic of Suez canal university, Egypt and randomly allocated into three groups, Nanosilver fluoride group, Silver diamine fluoride group and control group. For all groups, teeth were isolated by rubber dam. Access was done followed by partial caries removal. Silver diamine fluoride or Nanosilver fluoride were applied, and all teeth were restored with composite resin restorative. Patients were recalled after 3 and 6 months to follow-up the pulp vitality. R-statistical analysis software for Windows, version 4.1.1, was used to conduct the statistical analysis Results: At 3 month, for all groups, all teeth were successful. After 6 months, for silver diamine fluoride group, a single case failed. Regarding the nanosilver fluoride, all cases were successful. For the control group, two cases failed. No statistically significant difference was found between the tested groups. Conclusion: Application of 5% Nanosilver to fluoride varnish has similar clinical efficacy as silver diamine fluoride in arresting the dentin caries progression (AU)

Objetivo: Avaliar a eficácia de fluoreto de nanoprata em comparação ao fluoreto de diamina de prata no manejo de lesões profundas de cárie. Material e Métodos: Este estudo clínico controlado randomizado duplo-cego incluiu trinta e seis pacientes com lesões de cárie profunda em molares inferiores. Os pacientes foram recrutados no ambulatório da Universidade do Canal de Suez, no Egito, e alocados aleatoriamente em três grupos de tratamento: fluoreto de nanoprata, fluoreto de diamina de prata e grupo controle. Para todos os grupos, os dentes foram submetidos ao isolamento absoluto. O acesso à lesão foi feito seguido pela remoção parcial de tecido cariado. Tanto o fluoreto de diamina quanto fluoreto de nanoprata foram aplicados, e todos os dentes foram restaurados com resina composta. Os pacientes foram avaliados após 3 e 6 meses para o acompanhamento da vitalidade pulpar. O software estatístico R-statistical para Windows, versão 4.1.1, foi usado para as análises. Resultados: Em 3 meses, para todos os grupos, todos os dentes apresentaram sucesso no tratamento. Após 6 meses, para o grupo que utilizou o fluoreto de diamina de prata um único caso falhou. Em relação ao fluoreto de nanoprata, todos os casos apresentaram sucesso. Para o grupo controle, dois casos falharam. Não houve diferença estatística entre os grupos testados. Conclusão: A aplicação de verniz de fluoreto de nanoprata a 5% tem eficácia clínica semelhante ao fluoreto de diamina de prata na interrupção da progressão de cárie no tecido dentinário (AU)

Response of dental pulp capped with calcium-silicate based material, calcium hydroxide and adhesive resin in rabbit teeth

Direct pulp capping induces a local inflammatory process. Several biomaterials have been used for this procedure. The aim of this study was to compare the dentinal bridge thickness using three different pulp capping biomaterials with the conventional technique (high speed diamond bur) or Er-Yag laser, 1 month after pulp effraction. Materials and Methods: Forty two Class V cavities were prepared on the buccal surface of 4 maxillary incisors and 2 mandibular incisors of New Zealand rabbits. Specimens were divided into 6 treatment groups. Teeth were treated with: In Group 1: Er-Yag laser and Biodentine® (Septodont), in Group 2: Er: Yag laser and calcium hydroxide (Dycal® Dentsply), in Group 3: Er: Yag laser and adhesive system (Prime& Bond® NT Dentsply), in Group 4: high speed diamond bur and Biodentine® (Septodont), in Group 5: high speed diamond bur and calcium hydroxide (Dycal® Dentsply), and in Group 6: high speed diamond bur and adhesive system (Prime& Bond® NT Dentsply). The preparation was done with copious irrigation. The animals were sacrificed at 30 days and the teeth were extracted and prepared for histological analysis. Results: In the group of « laser Er-Yag ¼, iatrogenic pulpal wounds treated with Biodentine® were covered with a thick hard tissue barrier after 1 month. The difference was not significant with the groups of Dycal® used with Er: Yag laser and high speed diamond bur. Prime& Bond® NT Dentsply specimens showed a thin dentinal bridge layer. Conclusion: At 1 month, Er-Yag laser proved to be useful with Biodentine® for direct pulp capping procedures

Protección pulpar directa y posterior apexogénesis: informe de un caso clínico / Direct pulp capping followed by apexogenesis: a clinical case report

Objetivo: Describir el tratamiento de un paciente que pre- sentó un incisivo superior permanente con exposición pulpar y desarrollo radicular incompleto utilizando Biodentine como material para la protección pulpar directa. Caso clínico: Un paciente de 9 años fue derivado para la evaluación y el tratamiento del diente 11. El examen clínico y radiográfico reveló la presencia de una fractura amelodentinaria, con exposición pulpar y desarrollo radicular incompleto. Luego de lavar y desinfectar el área de la fractura, se protegió la pulpa expuesta con Biodentine y se restauró la cavidad. El paciente fue citado para control a los 18 y 25 meses. En los controles se comprobó que el diente se mantuvo asintomático y funcional. Luego de 25 meses, el examen clínico y radiográfico confirmó la presencia de pulpa vital y el completo desarrollo del remanente radicular. Los resultados obtenidos en el presente caso clínico sugieren que el empleo de Biodentine puede ser considerado como una valiosa alternativa para la protección de la pulpa ex- puesta en dientes con desarrollo radicular incompleto (AU)

Aim: To describe the treatment of a patient that presented a permanent maxillary central incisor with pulp exposure and incomplete root formation, using Biodoentine as the material for direct pulp protection. Clinical case A 9-year-old male patient was referred for evaluation and treatment of tooth 11. The clinical and radio-graphic examination revealed the presence of a dentinoe- namel fracture, with pulp exposure and incomplete root for- mation. After cleaning and disinfecting the area, the exposed pulp was protected with Biodentine and the cavity was re- stored. The patient was scheduled for control after 18 and 25 months. In these evaluations, it was confirmed that the tooth remained asymptomatic and functional. After 25 months, the clinical and radiographic examination showed the presence of vital pulp and a completed development of the root. The obtained results of this clinical case suggest that Biodentine can be considered a valuable alternative for pulp capping in teeth with incomplete root formation (AU)

Cementos a base de silicato de calcio: factor clave en el éxito del recubrimiento pulpar directo. Revisión de la literatura / Calcium silicate based cements: key factor in the success of direct pulp capping. Literature review

RESUMEN Tradicionalmente, el hidróxido de calcio (HC) era considerado el material de elección para el recubrimiento pulpar directo (RPD); pero esto ha cambiado con los años debido a las distintas desventajas que presenta. Los cementos a base de silicato de calcio (CSC) tienen propiedades ventajosas al compararlos con el HC como: bioactividad, biocompatibilidad, menor tiempo de fraguado, capacidad de sellado y resistencia, por lo que son usados en una variedad de procedimientos endodónticos, entre ellos el RPD. El presente artículo de revisión recopila información a partir de la búsqueda manual de artículos originales de investigación científica y revisiones de literatura de la base de datos de Medline/PubMed. Se describen las variedades de CSC, su mecanismo de acción, desventajas, factores relacionados y tasas de éxito clínico en su aplicación en casos de RPD.

ABSTRACT Traditionally, calcium hydroxide (HC) was considered the material of choice for direct pulp capping (RPD); but this has changed over the years due to the various disadvantages it presents. Calcium silicate-based cements (CSC) have properties that are advantageous to HC such as: bioactivity, biocompatibility, shorter setting time, sealing capacity and resistance, which they are used in a variety of endodontic procedures, including RPD.This review article compiles information from the manual search of original scientific research articles and literature reviews of the Medline / PubMed database. The varieties of CSC, their mechanism of action, disadvantages, related factors and rates of clinical success in their application in cases of RPD are described.

Decision-making for dental pulp exposure: a survey in graduate programs at Brazilian universities

Abstract Clinical decision-making tends to be based on what clinicians have been taught during undergraduate and graduate programs. The aim of the present study was to assess the clinical approach and to identify the factors that influence the decision-making for dental pulp exposure among graduate students and coordinating professors in endodontics programs offered at Brazilian universities. The study used a mail-out survey developed in the Qualtrics platform, based on seven clinical reports in which dental pulp exposure was evidenced. Descriptive statistics showing vital pulp therapy (VPT) and root canal treatment (RCT) were calculated for each clinical report. Data on the participants' (n = 113) profile and variables related to clinical and radiographic characteristics of the cases were evaluated as to their potential to affect decision-making and analyzed by logistic regression (p < 0.05). VPT was likely to be indicated in cases of patients with immature teeth (OR = 0.017; 95%CI = 0.004 -0.073). RCT indications were related to the presence of symptoms (OR = 5.326; 95%CI = 1.429-19.852) and old age (OR = 21.057; 95%CI=6.809-65.120). In pulp exposure secondary to trauma, time of pulp exposure was significantly associated with RCT indication (OR=3.267; 95%CI=1.332-8.012). The present study demonstrated that patient age, root development, and symptom features were the main factors affecting participants' decision-making.

Pulp vitality of primary molars with deep caries treated with ART restorations: 2-year RCT

Abstract: The aim of this study was to compare the pulp vitality of primary teeth with deep caries treated with two restorative techniques. The restoration survival rate was also evaluated as a secondary outcome. Children aged from 4 to 8 years with at least one deep carious lesion in molars were selected at the Ibirapuera University dental clinic. One hundred and eight deciduous molars were allocated into two groups: (1) restoration with calcium hydroxide cement lining followed by filling with high-viscosity glass ionomer cement (CHC+HVGIC) or (2) restoration with HVGIC. Pulp vitality and restoration survival were evaluated at 6, 12, and 24 months. Intent-to-treat analysis was used for pulp vitality, and survival analysis was performed with the Kaplan-Meier method (α=5%). Results: At 24 months, 86 restorations were evaluated, and 91 were evaluated at least once during the study. There was no significant difference between the restorative treatments regarding pulp vitality (CHC +HVGIC=70% and HVGIC=68.5%) (OR=1.091; CI95%=0.481-2.475). However, HVGIC (73%) restorations showed a higher survival rate than CHC+HVGIC (50%) (p=0.021). Thus, it can conclude that deep caries in primary molars should be restored with HVGIC, since the technique results in similar pulp vitality to the CHC +HVGIC, but with a higher restoration survival rate.

Experimental resin-based dual-cured calcium aluminate and calcium titanate materials for vital pulp therapy

Abstract: This paper evaluates the physicochemical and biological properties of experimental resin-based dual-cured calcium aluminate (CA) and calcium titanate (CTi) materials for vital pulp therapy (VPT). The experimental dual-cured materials were obtained as two pastes: a) Bis-EMA 10, PEG 400, DHEPT, EDAB, camphorquinone, and butylated hydroxytoluene; and b) fluoride ytterbium, Bis-EMA 10, Bis-EMA 30, benzoyl peroxide, and butylated hydroxytoluene. The materials were divided into six groups based on the added calcium component: MTA (MTA®, Angelus); CLQ (Clinker-Fillapex®, Angelus); CA (calcined at ,1200°C in pastes a and b); CA800 (calcined at 800°C in paste a); CA1200 (calcined at 1,200°C in paste a); and CTi (paste a). The real-time degree of conversion and rate of polymerization (n = 3), diametral tensile strength (n = 10), hydrogen potential (n = 15), calcium ion release (n = 10), water sorption and solubility (n = 10), and cell viability (n = 6) were evaluated. One- and two-way ANOVA and Tukey's post hoc test were used in the analysis of the parametric data, and Kruskal-Wallis and Dunn's multiple tests were used to analyze the nonparametric data (α = 0.05). CLQ, CA800 and CA1200 had the highest diametral tensile strength. The water solubility of MTA was similar to that of CA800, CA1200 and CTi. CA800 and CA1200 resulted in cell viabilities similar to those of MTA and CLQ. The experimental dual-cured CA-based material that calcined at 800°C showed physicochemical and biological properties suitable for VPT, and similar to those of MTA.

Incorporation of a polymerization catalyst for improved mechanical behavior and physicochemical characteristics of a light-cured pulp capping material / Incorporação de um catalisador de polimerização para aprimorar propriedades mecânicas e fisíco-químicas de um protetor pulpar fotoativável

Objective: To evaluate the influence of the incorporation of a polymerization catalyst to a light-cured pulp capping material on mechanical behavior and physicochemical characteristics. Material and Methods: Different percentages (2 wt%, and 4 wt%) of diphenyliodonium hexafluorophosphate (DPI) were incorporated into the Ultra-Blend Plus, a resin-modified calcium-based cement. The material without incorporation of DPI (0 wt%) served as control. Degree of Conversion (DC), Flexural Strength (FS), Elastic Modulus (EM), Water Sorption (WSp), Solubility (Sl), and pH of eluate at 24-h, 72-h, and 7-day storage times were measured. One-way ANOVA/Tukey posthoc tests were used to analyze the data (p <0.05). Results: For DC, FS, and EM, materials with different % of DPI showed statistically significant differences, so that 0% provided the lowest values and 2% the highest values. Materials with 0% and 2% of DPI provided statistically the lowest WSp, whilst material with 0% of DPI showed statistically the highest Sl. Conclusion: All materials provided statistically similar pH to eluates regardless of storage time, although only materials with DPI at 2% and 4% maintained pH of eluates statistically similar from 72 h to 7 days storage times.(AU)

Objetivo: avaliar a influência nas propriedades mecânicas e físico-químicas da incorporação de um catalisador de polimerização a um protetor pulpar fotoativável. Material e Métodos: foram adicionadas diferentes porcentagens em massa (2% e 4%) de hexafluorofosfato de difeniliodônio (DPI) ao Ultra-Blend Plus, um cimento à base de hidróxido de cálcio modificado por resina. O material sem a adição do DPI (0%) serviu como controle. Foram avaliados: Grau de Conversão (DC), Resistência Flexural (FS), Módulo de Elasticidade (EM), Sorção (WSp), Solubilidade (SI) e o pH do eluato nos tempos de 24h, 72h e 7 dias de armazenamento. ANOVA 1-way com pós-teste de Tukey (p <0.05). Foi utilizado para avaliar os resultados estatisticamente. Resultados: Os materiais com diferentes % de DPI apresentaram diferenças significativas para os testes de DC, FS e EM. A porcentagem em massa de 0% de DPI mostrou valores inferiores a todos os testados e os materiais com adição 2% apresentaram a melhor performance. Materiais com 0% e 2% de DPI apresentaram valores inferiores de WSp; a porcentagem de 0% proporcionou valores estatisticamente maiores para SI. Conclusão: Todos os materiais testados apresentaram pH semelhante nos eluatos independente do tempo de armazenamento, contudo, apenas os materiais com 2% e 4% mantiveram o pH dos eluatos estatisticamente similares nos tempos de estocagem de 72h a 7 dias.(AU)

The influence of the particle's size on the setting reaction of sol-gel derived calcium silicate particles / A influência do tamanho de partícula na reação de presa de cimentos de silicate de cálcio produzidos por sol-gel

Introduction: This study aims to analyze the influence of particles size of sol-gel derived calcium silicate particles in the setting reaction of bioactive endodontic cements. Materials and Methods: Sol-gel derived calcium silicate particles were synthesized and sieved to separate the particles in different sizes: CS400, CS200, and CS100. A commercial MTA (Control) was used as control. The particle size and the specific surface area were assessed by laser diffraction and nitrogen adsorption. The cements were prepared with water as the liquid for the reaction. The setting time was conducted according to ISO 6876, and the setting kinetics was analyzed by Fourier trans-formed infrared spectroscopy (FTIR) at different time points between 120s to 72h. Results: The particle size varied from 9.45µm (CS400 ) to 31.01 (Control). The higher specific surface area valuer reached 15.14g/cm2 in the CS400. The smallest particle sizes, the higher specific surface area, and the lowest setting time were found for CS400 (p < 0.05). Control presented the highest setting time (p < 0.05). The FTIR analyses showed the differences in materials structure over time, with faster hydration and crystallization for CS400. The setting kinetics was slower for Control even when compared to a sol-gel derived group with similar particle size. Conclusion:The route of synthesis and the particle size influences the setting reaction of calcium silicate-based cements. The reduction of particle size for sol-gel derived calcium silicates lead to the acceleration of the setting reaction of the produced bioactive endodontic cement.

Introdução: Este estudo tem como objetivo analisar a influência do tamanho de partículas de silicato de cálcio derivadas de sol-gel na reação de presa de cimentos endodônticos bioativos. Materiais e Métodos: Partículas de silicato de cálcio derivadas de sol-gel foram sintetizadas e peneiradas para separar as partículas em diferentes tamanhos: CS400, CS200 e CS100. Um MTA comercial (Controle) foi usado como controle. O tamanho das partículas e a área superficial específica foram avaliados por difração a laser e adsorção de nitrogênio. Os cimentos foram preparados com água como líquido para a reação. O tempo de presa foi conduzido de acordo com a ISO 6876, e a cinética de presa foi analisada por espectroscopia de infravermelho transformada de Fourier (FTIR) em diferentes pontos de tempo entre 120s a 72h. Resultados: O tamanho de partícula variou entre 9,45µm (CS400) e 31,01 (Controle). A maior área de superfície foi encontrada nas partículas do grupo CS400 (15.14g/cm2). Os menores tamanhos de partícula, a maior área de superfície específica e o menor tempo de presa foram encontrados para CS400 (p < 0,05). O Control apresentou o maior tempo de presa (p < 0,05). As análises de FTIR mostraram as diferenças na estrutura dos materiais ao longo do tempo, com hidratação e cristalização mais rápidas para CS400. A cinética de presa foi mais lenta para Control mesmo quando comparado a um grupo derivado de sol-gel com tamanho de partícula semelhante. Conclusão: A rota de síntese e o tamanho das partículas influenciam a reação de endurecimento dos cimentos à base de silicato de cálcio. A redução do tamanho de partícula para silicatos de cálcio derivados de sol-gel leva à aceleração da reação de pega do cimento endodôntico bioativo produzido.

Expression of Matrix Metalloproteinases-8 and Myeloperoxidase in Pulp Tissue after Pulpotomy with Calcium Silicate Cements

ABSTRACT Objective: To evaluate the pulp tissue of rat molars after pulpotomies with mineral trioxide aggregate (MTA), BiodentineTM (BDT) and calcium hydroxide (CH) mixed with sterile saline solution (24 hours, 72 hours, 7 days and 15 days), through correlating MPO activity with active neutrophils and MMP8 activity with tissue remodeling. Material and Methods: Thirty-eight Wistar rats were randomly distributed into groups (control, I (MTA gray), II (BDT), and III (CH)) and subdivided according to the study period of 24 hours, 72 hours, 7 days or 15 days after pulpotomy. MMP8 activity was assessed through fluorescence technique, and MPO activity was determined using the MPO assay. Results: A gradual decrease of MPO and MM8 activity occurred in the group MTA over the experimental periods (p<0.05). Groups BDT and CH exhibited an increase in the activity at 7 and 15 days (p<0.05). Conclusion: MTA demonstrated a decrease in the values of MPO e MMP8. BDT and CH showed high neutrophilic and collagenase activity over the experimental periods.

Caracterizações física e química de cimentos experimentais autoadesivos à base de cálcio / Physical and chemical characterizations of calcium-based self-adhesive experimental cements

Objetivo: Avaliar a Resistência de União (RU), Grau de Conversão (GC), Liberação de Cálcio (LC), Resistência Flexural (RF), Módulo de Elasticidade (ME) e Viscosidade (VS) de cimentos experimentais à base de cálcio autocondicionantes e autoadesivos. Três cimentos experimentais: A (CONTROLE) ­ sem fonte de cálcio, B (HIDROCAL) ­ com hidróxido de cálcio, C (CLORECAL) ­ com cloreto de cálcio foram sintetizados e avaliados juntamente a um cimento comercial D (ULTRAPLUS) (Ultra-Blend Plus®). Metodologia: Para a RU, foi utilizado o teste de cisalhamento, cujas amostras (1,3mm de diâmetro com 2mm de altura) foram aderidas à dentina bovina (n=10) e tensionadas em máquina de ensaios (1 mm/min) até́ ocorrer o deslocamento. Para o GC (n=3), foi utilizada a Espectroscopia Infravermelha com transformada de Fourier (FTIR). Na determinação da LC (n=3) foram utilizadas amostras circulares (1,0 mm x 0,4 mm) e a leitura foi realizada através de um espectrofotômetro de absorção atômica nos tempos de 3h, 24h e 72h. Para RF/ME (n=10), amostras em formato de barra (7mm x 2mm x 1mm) foram confeccionadas e avaliadas por meio de uma Máquina de Ensaios Universal no teste de flexão de três pontos. Para a VS (n=30), a variação da taxa de deformação foi determinada por um reômetro rotacional de cilindros concêntricos. Os dados foram analisados por ANOVA 1 e 2 fatores seguido pelo pós teste de tukey (p<0,05). Resultados: Para RU todos os materiais experimentais apresentaram valores estatisticamente maiores que o comercial (p<0,01). Para o GC os cimentos CONTROLE e HIDROCAL apresentaram valores estatisticamente maiores que os demais (p<0,01). Frente à LC o CLORECAL e ULTRAPLUS apresentaram valores estatisticamente superiores após 72h (p<0,01). O ULTRAPLUS apresentou estatisticamente a maior RF e o menor ME (p<0,05). Os cimentos HIDROCAL e CLORECAL apresentaram valores de VS estatisticamente superiores aos demais (p<0,01). Conclusão: De maneira geral, o cimento experimental à base de cloreto de cálcio mostrou-se mais promissor (AU).

Objective: To evaluate the Bond Strength (BS), Degree of Conversion (DC), Calcium Release (CR), Flexural Strength (FS), Elastic Modulus (EM) and Viscosity (VS) of experimentally calcium based cements self-etching and self-adhesive. Three experimental cements: A (CONTROL), B (HYDROCAL), C (CLORECAL) were synthesized and evaluated with a commercial cement D (ULTRAPLUS) (Ultra-Blend Plus®- South Jordan, Utah, USA). Methodology: For the BS, the shear test was used, whose samples 1.3mm in diameter and 2mm in height) were adhered to the bovine dentin (n=10) and tensioned in a testing machine (1mm/min) until occurring the displacement. For the DC (n=3), Infrared Spectroscopy with Fourier transform (FTIR) was used. In determining the CR (n = 3) circular samples (1.0mmx0.4 mm) were used and the reading was performed through an atomic absorption spectrophotometer at 3h, 24h and 72h. For FS/ ME (n= 0), bar-shaped samples (7mmx 2mmx1mm) were made and evaluated using a Universal Testing Machine in the three-point flexion test. For VS (n = 30), the variation in the strain rate was determined by a rotational concentric cylinder rheometer. Results: For BS, all experimental materials showed statistically higher values than the commercial material (p <0.01). For the DC, the CONTROL and HIDROCAL cements showed statistically higher values than the others (p <0.01). In relation to CR, CLORECAL and ULTRAPLUS showed statistically higher values after 72 hours (p <0.01). ULTRAPLUS showed statistically the highest FS and the lowest EM (p <0.05). The HIDROCAL and CLORECAL cements showed VS values statistically higher than the others (p <0.01) Conclusion: In general, the experimental cement based on calcium chloride proved to be more promising (AU).

Pulp capping with mineral trioxide aggregate or Biodentine: a comparison of mineralized barrier formation and inflammatory and degenerative events

Abstract: Biodentine in endodontic practice has been widely investigated, but comprehensive histological descriptions of degenerative and inflammatory responses are not covered in most of the studies that compare pulp capping materials. This study aimed to evaluate pulpal responses to mineral trioxide aggregate (MTA Angelus) and Biodentine, focusing on mineralized barrier formation and on inflammatory and degenerative events. 80 male Wistar rats were assigned to 5 groups, according to the materials used for pulp capping and coronal sealing (n=8 per group/period). The lower first molars were mechanically exposed, capped with either MTA or Biodentine, and restored with silver amalgam. In an additional test group, the teeth were capped and sealed with Biodentine. The teeth capped with gutta-percha and restored with silver amalgam served as positive control, whereas untreated teeth served as negative control. Pulpal responses and coronal sealing were evaluated after 14 or 21 days. Data was statistically analyzed by the Kruskal-Wallis and Dunn's post hoc tests (p<0.05). Biodentine and MTA presented satisfactory results, showing a milder inflammatory response (p<0.0001) and more pronounced formation of mineralized barrier (p<0.0001) compared to the teeth capped with gutta-percha. As a restorative material, Biodentine kept coronal sealing in only 37.5% of the samples. Biodentine showed favorable properties in vital pulp therapy, being similar to MTA. However, it was not effective in protecting dental pulp from microleakage during the experimental period.

Selective carious tissue removal and glass ionomer liner reduction of pulp stress in bulk fill resin composite restorations

Abstract: To evaluate the effect of selective or nonselective carious tissue removal and the use of a resin-modified glass ionomer (RMGIC) liner under bulk fill resin composite restoration on the stress at the pulp chamber, the elastic moduli of hard, firm, soft and intact dentin were calculated using nanoindentation. Post-gel shrinkage of the bulk fill resin composite and RMGIC were determined using the strain-gauge method. Six finite element models were created by using digital radiography with the combination of two study factors: a) carious tissue removal: selective removal or nonselective removal of carious tissue, and b) use of RMGIC liner: with or without 1.0 mm of RMGIC liner. The modified von Mises stresses (mvm) (MPa) were extracted on the nodes of the internal wall of the pulp ceiling chamber at 100 N occlusal loading. Data were analyzed descriptively and recorded quantitively. Both study factors influenced the stress distribution. The mvm stress during the restorative procedure was higher for nonselective carious tissue removal without RMGIC (25.9 MPa) and lower for selective carious tissue removal associated with RMGIC (13.5 MPa). The dentin elastic modulus increased from soft carious (3.6 ± 0.3 MPa) to firm carious (5.2 ± 1.0 MPa) to hard carious (10.9 ± 1.2 MPa) to intact dentin (22.7 ± 3.0 MPa). Molars with carious lesions showed high mvm stress at the pulp ceiling (89.6 MPa) and at fragilized coronal structure remaining. Selective carious tissue removal followed by restoration using a Vitrebond liner and Tetric N-Ceram Bulk fill reduced the stress at the pulp chamber ceiling.

Investigation of a modified hydraulic calcium silicate-based material - Bio-C Pulpo

Abstract This study evaluated the physicochemical, biological, and antimicrobial properties of a new hydraulic calcium silicate-based modified material, and compared it with MTA Repair HP and MTA Angelus. The materials were assessed regarding color luminosity (L), color change, radiopacity, setting time, and ISO 6876:2012 linear flow. Volumetric filling and volume change were evaluated using microcomputed-tomography (µCT). Chemical characterization after 28 days in Hank's Balanced Salt Solution (HBSS) and pH analysis were also assessed. Biological characterization of cytotoxicity and microbiological assessment were also undertaken. Shapiro-Wilk, ANOVA, Levene and post hoc analyses with Bonferroni correction were performed, adopting a 5% significance level (p <0.05). Bio-C Pulpo exhibited the highest L values after 90 days. All tested materials demonstrated color change during the analyses, and had radiopacity above 5 mm Al. MTA Repair HP set faster than Bio-C Pulpo, whereas the latter had the highest linear flow. MTA Repair HP had the highest volumetric filling in µCT analysis. Bio-C Pulpo showed the highest alkalinity during all tested periods, and the highest volumetric loss (above 9%), in comparison with MTA Repair HP and MTA Angelus. Bio-C Pulpo did not form calcium hydroxide after hydration. MTA Repair HP demonstrated the highest cytocompatibility, and Bio-C Pulpo, the highest cytotoxicity. No inhibition halos were observed for any material, and similar higher turbidity values were seen after direct contact. Composition additives used in Bio-C Pulpo modified its properties, and both the absence of calcium hydroxide deposition after hydration, and the related cytotoxicity of this material are of particular concern.

Application of poly(lactic-co-glycolic acid) in the treatment of pulp diseases / 口腔疾病防治

@#The development of materials science is of great significance to the treatment of dental pulp diseases. Poly lactic acid glycolic acid (PLGA) copolymer is an organic macromolecule compound that is widely used in the preparation of biomedical materials. In recent years, PLGA, as a drug/molecular loaded system and tissue regeneration scaffold, has shown prospects for application in the treatment of dental pulp diseases. This paper will review the application of PLGA in the treatment of dental pulp diseases and provide a basis for its further development and utilization. The results of the literature review show that PLGA is a drug/molecular delivery system that is mainly used in the improvement of pulp capping materials, root canal disinfectant and apexification materials. PLGA-improved pulp capping agents can prolong the action time of the drug and reduce toxicity. The modified root canal disinfectant can realize the sustained release of drug, make the drug penetrate deeper into the subtle structure, and contact more widely with the pathogenic bacteria. The modified apexification materials can provide more convenient administration methods for apexifixment. As a scaffold for tissue engineering, PLGA is mainly used in the study of pulp regeneration. The optimization of PLGA physical properties and action environment can provide a more suitable microenvironment for seed cells to proliferate and differentiate. How to utilize the advantages of PLGA to develop a more suitable material for endodontic application needs further study.

Vital pulp therapy of pulp inflammation of permanent teeth / 口腔疾病防治

@#Vital pulp therapy aims to maintain healthy pulp tissue as much as possible to improve the long-term survival of teeth. It has limited indications and uncertain curative effects. The pathological changes in inflamed pulp are the histological basis for the determination of treatment strategies and the treatment outcome; however, pulp sensitivity testing cannot reflect the actual histological status of the pulp. With the development of basic and clinical research on vital pulp therapy, the innovation of modern diagnostic and therapeutic technology and capping material, vital pulp therapy can be used as a treatment of teeth on which it was previously thought pulpectomy was necessary. Based on the evidence-based literature, this paper analyzes and summarizes the pathological changes of pulpitis and clinical research on the treatment of pulpitis. Vital pulp therapy can be a treatment for mature teeth with carious exposure and symptoms of irreversible pulpitis if comprehensive applications, including laser Doppler flowmetry, tissue oxygen monitoring, magnetic resonance imaging and microscopy, are used to determine the degree of pulp retention and if infection control and the use of biocompatible capping material are emphasized. In the future, it will be necessary to improve the success rate of vital pulp therapy for the treatment of pulpitis through research on the mechanism of pulp repair and regeneration, the precise diagnosis of pulpitis, and the development of pulp capping materials.